SABFOIL M92 MAST CARBON
The New SABFoil M92 Mast Carbon, has a profile specifically designed to ensure high performance and better stiffness even at high speeds. Based on the updated construction featured in our M72 72cm mast and M82 82cm mast these masts give the best balance of stiffness vs weight.
This updated construction allows the use or large Moses or SABFoil wings especially when used with the new F700HS high strength fuselage.
Weighing in at just 2.3 kilos, this mast is designed to handle whatever conditions you can throw at it, Kite, Wing, Prone or SUP. The mast has a thickness of 16mm and an overall chord length of 150 mm (measured at 10cm from the board connection).
N.B. Please note that SABFOIL masts ship as mast only and require a dome headed bolt or screw to connect to your board. These masts are not compatible with countersunk connectors.
Works well with https://actionsportswa.com.au/product/moses-albatross-t98/
More info at https://sabfoil.com/en/products/mast-92-carbon-plate-kite-surf
Always keep the threaded holes clean and lubricate them often using lithium grease (code MHW033) to avoid and prevent oxidation and corrosion due to seawater. Always clean your mast with fresh water after use.
|Compatibility||FS647 Kite Fuselage||FS710 Surf Fuselage||NEW FS700 HS Fuselage||FS900 Windsurf Fuselage||FS1150 Windsurf Race Fuselage|
Compatible with Moses and Sabfoil fuselages as above